By Shivam Midha · How we check our answers
Percent error shows how far a measured or estimated value is from the true (accepted) value, as a percentage of the true value. It is used in science labs, engineering and anywhere a measurement is compared with a known value.
Enter the value you measured and the accepted value. The calculator gives the percent error and shows the working.
Percent error = |measured value − true value| ÷ |true value| × 100
| Measured | True value | Percent error |
|---|---|---|
| 9.6 | 9.81 | 2.14% |
| 52 | 50 | 4% |
| 1.02 | 1 | 2% |
| 0.48 | 0.5 | 4% |
| 102 | 100 | 2% |
| 3.1 | 3.14159 | 1.32% |
The standard formula uses the absolute value, so percent error is never negative. Some courses keep the sign to show whether the measurement was too high (positive) or too low (negative); check which your teacher expects.
It depends on the experiment. In many school labs under 5% is considered good, while precise lab work may need under 1%.
Percent error compares a measurement with a known true value. Percent difference compares two measurements when neither is known to be correct, using their average as the reference.
Because the error is measured relative to the correct answer. Dividing by the measured value would make the result depend on your mistake.